Mectron combi touch Manual De Uso Y Mantenimiento página 167

USE
Irrigation can be excluded in "endo" and
"perio/scaler" modes with power levels
from 1 to 5 and in "restorative" mode
with power levels from 1 to 4.
CAUTION: The exclusion of irrigation
with non "Dry Work" inserts can cause
overheating with consequent breakage
of the handpiece.
refill
NOTE: On regulation of the irrigation
flow rate ("-" and "+") a prolonged
acoustic signal is emitted when high full
scale is reached.
NOTE: the irrigation flow rate can be
adjusted using the "-" and "+" keys also
during the treatment (holding the pedal
pressed).
"FLUSH" FUNCTION
(Ref. 6 inside cover)
The appliance has a "flush" key, which
allows the irrigation circuit to be filled
and rinsed.
Filling the irrigation circuit: Before
starting the treatment, the "flush"
function can be used to allow the liquid
refill
to reach the insert, so as to start the
treatment with the necessary irrigation.
Cleaning the hydraulic circuit:
The "flush" function allows the irrigation
circuit rinse cycle to be performed. This
function must be used at the end of the
intervention and before cleaning and
sterilising all parts.
NOTE: If both handpieces are stowed
in their housings, the "flush" function
cannot be activated.
27