Procedure - Mectron combi touch Manual De Uso Y Mantenimiento

8.1.2.2

Procedure

Disconnect the irrigation solution tank
from the machine core unit, pulling it
outwards;
Unscrew the cap from the irrigation
solution tank and empty it;
Rinse the irrigation solution tank with
running water;
Fill the irrigation solution tank with 250ml
of disinfectant (CIDEX
®
Holding the irrigation solution tank in a
vertical position, insert it on the machine
core unit of the device until it comes into
contact;
CAUTION: Do not overturn the tank,
the cap is not watertight. The outflow
of physiological solution or aggressive
liquids may cause damage to the
surfaces.
CLEANING AND STERILISATION
OPA);
1
2
3
4
69