Nice OXI Instrucciones Y Advertencias Para La Instalación Y El Uso página 5

Verification of the TYPE OF ENCODING system adopted by the transmitters already memorised
01. Disconnect the power supply to the control unit then restore the
power supply and count the number of flashes emitted by LED B
on the receiver:
• 1 green flash = transmitters with Flo encoding system
• 2 green flashes = transmitters with O-Code, O-Code/A or FloR,
FloR/A encoding system
• 3 green flashes = transmitters with Smilo encoding system
• 5 green flashes = no transmitter memorised
To change the coding assigned to the first one-way transmitter memorised, it is necessary to delete from the
memory all the transmitters present, by strictly adopting Procedure 4 (Paragraph 3.5) and choosing the option,
"ALL THE RECEIVER MEMORY".
WARNINGS for carrying out the programming procedures
• During the execution of the programming procedures, refer to Fig. 1 to identify key
A and LED B on the receiver. • To understand the meaning of the icons featured in the
procedure, refer to the table, "Key to the symbols used in the manual". • The proce-
dures have a limit time; therefore, before implementing them, it is important to read and
understand all the steps to be completed.
OFF ON
x 1
x 2
x 3
x 5
A
English - 4
B
1