Member's Mark M3206ALP Manual De Operación página 19

Install the AC (alternating current) Rotisserie Motor onto the Motor Bracket as shown below. Be sure the Motor
4.
attaches to the Bracket with the electrical cord down. This installation insures that once the Spit is inserted
into the Motor it will also rest securely into the slot of your grill bowl.
Rotisserie M otor
Motor Bracket
5. Insert the assembled Rotisserie into the Motor as shown below. The Motor should be on the left side of your
grill and the Handle on the right side. Place the Bushing into the slot opening on the right side of your grill
bowl, then tighten the Collar Thumbscrew to the left of the Bushing. The Collar will stabilize the Rotisserie
during the cooking process and the Bushing allows the Rotisserie Spit to turn smoothly. Plug the Rotisserie
into an outlet and turn on to test.
M otor
The Bushing and Collar must always be used with this Rotisserie.
BEFORE rotisserie cooking you will need to remove the Cooking Grid(s) and possibly the Savor Plates®
from your grill. When rotisserie cooking place a Cooking Pan under the food to be cooked. This will
capture the drippings and keep your grill clean of excess grease which could cause a fire. Use caution
when moving a Cooking Pan containing hot oils.
Rotisserie Spit must rest securely
into the slot of your grill bowl.
T hu mbsc rew
Holding Forks
T hu mbsc rew
Spit
19
Bushing
Collar
Handle