Waterpik Waterflosser WP-861 Manual De Instrucciones

QUICK START GUIDE
1
FIRST USE
Fill reservoir with
warm water and
replace it firmly
on the base.
3
LEAN OVER SINK
Close lips enough to
prevent splashing, while
still allowing water
to flow from mouth
into the sink.
Model WP-860/861/862/871/872/881/882
This device is only compatible with voltages of 120 VAC, 60Hz
Turn pressure to high, point
tip into sink, turn power
and water switches on until
water flows. Then turn off.
Insert
Insert tip firmly until
it clicks into place.
4
Aim water at the gumline
at a 90° angle. Follow the
gumline and pause briefly
between teeth.
Review full instruction book prior to first use
Water ON
TECHNIQUE
2
START WATER FLOSSING
TO AVOID MESS: PLACE THE
TIP IN YOUR MOUTH BEFORE
TURNING UNIT ON
Turn power and water on.
Start on low pressure and
increase to your liking.
5
HOW TO VIDEO
Visit waterpik.com/vid860
Register your product and
receive over $50 in savings.
waterpik.com/registration
© 2017 Water Pik, Inc.
1.800.525.2774 (USA)
English