Cisco Linksys WRT54GL Guía De Instalación Rápida página 6

F.
To configure the Router's
wireless settings, click the
Wireless tab. Then click the
Basic Wireless Settings tab.
G.
Select the Wireless Network
Mode:
Mixed If your network has
Wireless-G and Wireless-B
devices, then keep the default,
Mixed.
G-Only If your network only
has Wireless-G devices, select
G-Only.
B-Only
If your network only
has Wireless-B devices, select
B-Only.
Disable
If you want to disable
wireless networking, select
Disable.
H.
Enter the Wireless Network Name (SSID). The Wireless Network Name is
identical for all devices in the wireless network. It is case-sensitive and
must not have more than 32 characters (use any keyboard character).
For added security, you should change the default (linksys) to a unique
name.
I.
Select the appropriate channel from the Wireless Channel drop-down
menu. All devices in your wireless network must broadcast on the same
channel in order to function correctly.
J.
When wireless adapters or other clients survey the local area for
wireless networks to associate with, they will detect the SSID broadcast
by the Router. To broadcast the Router's SSID, keep the default, Enable.
If you do not want to broadcast the Router's SSID, then select Disable.
K.
Click Save Settings to apply your changes.
L.
Power your broadband modem off and back on again.
M.
Power on your computers and other network devices so they can
obtain the Router's new settings.