Abaxis VETSCAN VS2 Manual Del Usuario página 51

To create a new control:

a. Touch
b. Set minimum and maximum values for each of the ana-
lytes to be included in the range:
i. Select the analyte to adjust from the list. If needed,
ii. Use the controls to set upper and lower limits for the
Note: Entering zero for both values suppresses printing ranges for this analyte in results
(blanks appear instead), and also suppresses checking the recovered value against the
range limits.
c. Touch
To create a reference range for a particular pre-defined species label:

a. Touch
b. Select the animal type from those listed. Use the up (
and down (
.
Control 1
use the up (  ) and down (
the entire list.
analyte.
Use the up ( 

adjust the values.
Touch to set both limits to zero.

Clear
Touch

Default
for the range.
to store the changes.
Save
.
Select
 ) arrow keys to scroll through the list.
Configuring the Analyzer
 ) arrow keys to view
) and down (  ) arrow keys to
to use the factory default values
 )
5-7