Setting With The Display, Wizard; Configuration Of Floats Or Level Probes; Figure 36: Configuration Of Drainage Floats Or Level Probes; Figure 37: System Status In Drainage Mode, A With Level Probes. B With Floats - Dab E.box Plus Instrucciones De Instalación Y Mantenimiento

7.7 Setting with the display, wizard

The E.Box D can be configured with a simple wizard. The device asks the user for all the parameters necessary for its
configuration. If necessary, it can be loaded by pressing the "set" + "+" keys when switching on. To navigate in the
wizard, use the following keys:

"mode" to accept the parameter displayed and move on to the next,

"mode" held down for more than 1 second to return to choose the parameter,

"-" e "+" to vary the value of the parameter.

7.8 Configuration of floats or level probes

After configuration, the system status will be one of those shown in Figure 37, depending on whether level probes or
floats are used.

Figure 37: System status in drainage mode, A with level probes. B with floats

Figure 36: Configuration of Drainage floats or level probes

ENGLISH
95