Setting With The Display, Wizard; Configuration Of Floats Or Level Probes; Figure 24: Configuration Of Filling With Floats Or Level Probes; Figure 25: System Status In Filling Mode, With Floats Or Level Probes As Control Inputs - Dab E.box Plus Instrucciones De Instalación Y Mantenimiento

6.7 Setting with the display, wizard

The E.Box D can be configured with a simple wizard. The device asks the user for all the parameters necessary for its
configuration. If necessary, it can be loaded by pressing the "set" + "+" keys when switching on. To navigate in the
wizard, use the following keys:

"mode" to accept the parameter displayed and move on to the next,

"mode" held down for more than 1 second to return to choose the parameter,

"-" e "+" to vary the value of the parameter.

6.8 Configuration of floats or level probes

After configuration, the system status will be one of those shown depending on whether level probes or floats are
used.

Figure 25: System status in filling mode, with floats or level probes as control inputs

Figure 24: Configuration of Filling with floats or level probes

ENGLISH
87