KitchenAid 5KMT2109 Manual De Usuario página 7

3.
Press Reheat button ( ); The toast will pop up automatically at the end of the cycle and
the Toaster will turn off, or you may press Cancel ( ) at any time to cancel the function.
NOTE: No shade adjustment is necessary — the Reheat function overrides whatever
shade level you have set.
CARE AND CLEANING
CLEANING THE TOASTER
IMPORTANT: The Crumb Tray will be hot immediately following a toasting cycle. Allow the
Toaster to cool before emptying the Crumb Tray. Allow the appliance to cool completely before
putting on or taking off parts, and before cleaning the appliance.
NOTE: For consistent browning results, empty the Crumb Tray after each use.
1.
Unplug the Toaster and let it cool before cleaning.
2.
Wipe the Toaster with a soft, damp cotton cloth. Do not use paper towels, abrasive
cleansers, or liquid cleaning products. Do not immerse the Toaster in water.
NOTE: If grease or oil splatters on the Toaster, wipe splatters away immediately using a
clean, damp cotton cloth.
3.
Press the PUSH icon located in the center of the Crumb Tray.
4.
Once the Crumb Tray has opened slightly, slide it out of the Toaster and shake the crumbs
into a waste container.
IMPORTANT: Be sure to open the Crumb Tray by pressing the PUSH icon. Forcing the
Crumb Tray open may damage the Crumb Tray.
5.
The Crumb Tray should be hand washed only.
6.
Replace Crumb Tray by sliding it back into its slot, and pressing in on the center of the
Crumb Tray until it clicks into place.
NOTE: Do not use the Toaster without the Crumb Tray installed.
NOTE: KitchenAid does not recommend the use of a Toaster cover.
©2024 All rights reserved.
7