Snooze Function; Radio Mode; Sleep Operation - Soundmaster Fur4005 Manual De Instrucciones

ALARM
Beep alarm or radio alarm will ring for 30 minutes if no key is pressed, then it will stop
automatically and wait for same alarm time on next day.
Enable / disable the Alarm
Press and hold the "ALARM 1" (5) / "ALARM 2" (6) button to enable or disable the alarm. Once
the alarm is activated, the bell symbol will be appeared on the display.

SNOOZE FUNCTION

When Alarm rings, press Snooze button (8) to suspend the alarm & to activate the snooze
function, Beep or Radio alarm will stop. 9 minutes later the alarm will ring again. Press
SNOOZE key again, alarm will be suspended again, another 9 minutes later the alarm will ring
again and so on until the next alarm rings.
Note: The interval time of the Snooze function is 9 minutes.
If you want to disable the SNOOZE function and stop alarm completely, press Radio
-
ON/OFF button (9). If you don't press any button, the alarm will ring during 30 minutes &
stop automatically.
Icon of AL1 and AL2 will blink as long as Snooze function is still operating. Once Snooze
-
is turned off icon of AL1 / AL2 stop blinking and lights on the display.

RADIO MODE

Note: Ensure that the FM antenna is completely unrolled and extended to have the best FM
reception.
1. Press the Radio ON/OFF button (9) to turn the unit on.
2. Use the Tune - (3) or Tune + (4) button to select the desired radio station. If you press and
hold the Tune – (3) or Tune + (4) button for one second, then release, the unit will
automatically scan to the next broadcasting station.
3. Press the ON/OFF button (9) to turn the radio OFF.
To set / recall the radio presets
1. Press the ON/OFF button (9) to turn the unit ON.
2. Use the Tune + or Tune - button to select the desired radio station.
Press and hold the memory / memory + button; "P01" will blink in the display.
3.
Use the Tune+ or Tune- button to select the desired preset station (P01-P10)
4. Press the memory / memory + button again to set the preset.
5. Repeat steps 2 through 4 to set more presets.
6. The unit can preset 10 stations totally for FM.
When "P01-P10" is blinking, press the Tune+ or Tune- button to select the preset number.
7.
8. When recalling preset stations, press memory / memory + button to select the preset
number.

SLEEP OPERATION

When you listen to the radio, press the SNOOZE/SLEEP/DIMMER (8) button to enter into the
sleep mode. You can adjust the sleep timer from 90 minutes to 15 minutes by pressing
repeatedly the SNOOZE/SLEEP/DIMMER button (8). When sleep timer is selected, the unit will
automatically turn off once time is up.
FUR4005 / English Instruction Manual
4