Time And Calendar Manual Setting; Alarm Setting - Soundmaster Fur4005 Manual De Instrucciones

3. SETTING WITHOUT RADIO CONTROLLED MANUAL SETTING:
- Can be done when antenna tower icon is turned off by pressing SNOOZE button (8) for 3
seconds.

TIME AND CALENDAR MANUAL SETTING

Setting Time and Calendar
Press SET/MEM/M+ (7) button in standby mode and keep depress over 2 seconds to enter time
set mode, after enter the setting mode, press SET/MEM/M+ button (7) to change the mode
cycle as follows:
Normal → Year → Month → Day → 12/24 H format → Real time Hour → Real time Min →
Action (during data adjustment):
- Press << / Tune - button (3) to adjust data backward.
- Press >> / Tune + button (4) to adjust data forward.
- Keep depressed << or >> button for 2 seconds to enable auto forward.
- Use SET/MEM/M+ (7) button to confirm each setting.
Changing the display between time and date
In standby mode, press and hold the Volume + button (2) until the display shows "ON". Now the
display changes between time and date for approx. 7 seconds. To deactivate the function, press
and hold the Volume + button (2) again until "OFF" appears in the display.

ALARM SETTING

Setting Alarm 1 and Alarm 2
Press the alarm set button (5/6) during normal mode to show the alarm time. Afterwards keep
depress the alarm set button (5/6) over 2 seconds to enter the alarm set mode. After enter the
setting mode, press the alarm set button (5/6) to change the mode cycle as follows :
Normal → AL 1 Hour → AL 1 Min → AL 1 weekday Alarm → AL 1 wake beep → AL 1 wake
radio → AL 1 wake radio volume →Normal.
Normal → AL 2 Hour → AL 2 Min → AL 2 weekday Alarm → AL 2 wake beep → AL 2 wake
radio → AL 2 wake radio volume →Normal.
Select alarm weekday mode as follows:
1-5: Monday to Friday
1-7: Whole week
6-7: Saturday & Sunday
1-1: One day of week
1=Monday, 2=Tuesday, 3=Wednesday, ...
NOTE: The volume of the alarm tone / alarm radio slowly increases!
ACTION (DURING DATA ADJUSTMENT):
- Press << / Tune - (3) button to adjust data backward.
- Press >> / Tune + (4) button to adjust data forward.
- Keep depressed << or >> button for 2 seconds to enable auto forward.
- Use ALARM 1 / ALARM 2 set button to confirm each setting.
3
FUR4005 / English Instruction Manual
Normal