Power Connection; Getting Start - Soundmaster Fur4005 Manual De Instrucciones

INTRODUCTION
The init is designed to automatically synchronize its current time and date with radio signal
generated from DCF 77 Frankfurt, Germany.

POWER CONNECTION

Plug the AC power cord to a household outlet AC source. This unit is equipped with a battery
backup system, it requires a 3V CR2032 flat lithium battery (not included). Insert the battery in
the battery compartment, making certain that the positive and negative (+ and -) battery
terminals are attached to the corresponding terminals on the plate in the battery compartment. If
an AC power failure occurs; the clock automatically switches to the battery power supply, the
clock and time memory continue running. The display is not visible at this time! When the AC
power resumes, the clock switches back to AC again and the display will show again the time.

GETTING START

Plug the AC power cord to a household outlet AC source.
- The unit will display full segment for two seconds, then it will enter the normal mode.
- Display will lighten up.
- The unit will start searching RCC (RADIO CONTROLLED CLOCK) signal automatically.
During the search the antenna symbol flashes.
- The antenna icon appears and remains displayed when the time has been successfully set.
- If no time setting is possible after approx. 10 minutes, the search is automatically ended and
the antenna symbol disappears.
Note:
• During automatic time search, the device is only conditionally operable (switchable on /
off).
• Auto search can be stopped by pressing snooze button (8) for 3 seconds.
- Antenna tower icon and all wave icons will keep displaying.
- Antenna tower icon and all wave icons will turn off.
1. RECEPTION
- It will take 3-10 minutes to complete.
Note: For best results, place the radio controlled clock antenna (15) away from metal or
electrical objects and near a window with a clear view to the sky.
2. SETTING WITH RADIO CONTROLLED:
- Not necessary as it is automatically adjusted.
Display after successful time setting
Display after not possible time setting
FUR4005 / English Instruction Manual
2