Soundcore A3902 Manual De Usuario página 6

Tap the multifunction touchpad on the left
earbud twice
Reset
3 4
How to reset the earbuds if you can only hear sound on one side:
1. Delete "Soundcore Liberty Air X" from your device's
Používání
1 2
Activate Siri / Other voice control software
5. After the pairing information is cleared, take
both earbuds out of the charging case and
place them next to each other. If TWS pairing is
successful the LED indicator on the left earbud
will start flashing slowly and the LED indicator
on the right e arbud will flash rapidly.
Bluetooth list, and turn off the Bluetooth on your device. 2.
Place one earbud in the charging case and make sure it's
7" 7"
charging. The LED indicator will be solid white.
Soundcore
Liberty Air X
07 English English 08
6. Turn on Bluetooth on your device and search
for "Soundcore Liberty Air X" to connect.
Specifications
Specifications are subject to change without
notice.
Input 5 V 0.5 A Charging time 2 hours
Playtime (varies by volume level and
content) 7 hours Weight (product net weight) 55 g / 1.9
oz Impedance 16 Ω Driver (full range) 6 mm × 2
Frequency response 20 Hz - 20 KHz Bluetooth version V
5.0 Range 10 m / 33 ft
1. Zastrčte každé sluchátko dovnitř do ucha.
2. Otočte je a najděte nejpohodlnější pozici.