Shure MXA901-R Manual De Usuario página 19

Shure DSP Features for Noise
DSP Feature
Noise reduction
Enhanced noise filtering
AI denoiser
In this example, enhanced noise filtering removes loud typing sounds happening on one end of the coverage area and focuses
on the person speaking.
To use speech gating threshold and enhanced noise filtering:
1. In the microphone's control software, go to IntelliMix > Properties. Scroll down to turn on the 2 settings.
2. Make a test call. Have someone on the far end tell you how the signal sounds and adjust as needed.
Note: If the microphone is routed to IntelliMix Room and you're using the
Purpose
Removes constant background noise
(such as HVAC)
Removes noise sources that:
Are in the microphone's coverage area
Are not immediately next to a person
talking. Example: If a person talking
opens a bag of chips, you will still hear
the bag.
Removes any noise, even noise that
happens immediately next to a person
talking
AI denoiser feature, turn off enhanced noise filtering.
Available in:
All devices with IntelliMix DSP
Firmware 6.2 and newer for:
MXA710, MXA901, MXA902: On or off
settings
MXA920: Low, medium, or high settings
IntelliMix Room software
Shure Incorporated
19/51