Segway ST2 Pro Manual Del Producto página 4

EN
Handlebar Functions
Name Function
Power on/off
Wake up the dashboard
Power Button
Back to the previous
speed mode
Confirm Bluetooth
password
Light mode switching
Left Control
Enable/Disable Cruise
Switch
Mode
Switch between 1WD
and 2WD
Mode switching
Activate BOOST Mode
Right Control
Switch
Switch to Walk Mode
Throttle Speed up
Turn on/off the left/right
Direction
direction indicator
Indicator Button
Use emergency flashers
Horn Button Use horn
Bell Use bell
02
Operation method
Press the Power Button to power on the scooter. Press and hold to power it off.
Note: Only available when the scooter is unlocked.
Press the Power Button to wake up the dashboard when the dashboard
automatically dims.
When the scooter automatically enters Park Mode, press the Power Button to go
back to the previous speed mode.
While connecting to the scooter via the Segway-Ninebot App, press the Power
Button to confirm Bluetooth password.
Rotate clockwise to switch light modes, successively Low Beam Mode, High
Beam Mode, Auto Headlight Mode and OFF. Rotate counterclockwise to go back
to the previous light mode.
Press the Left Control Switch to enable Cruise Mode, and the scooter will cruise
at a constant speed. Press again to disable it.
When the scooter is at a complete stop, press and hold the Left Control Switch
to switch between 1WD and 2WD.
Rotate clockwise/counterclockwise to switch between speed modes.
1) Press the Right Control Switch to enable BOOST Mode.
* In Race Mode only.
2) Press again or switch the speed mode to disable it.
When the scooter is at a complete stop, press and hold the Right Control Switch
to switch to Walk Mode. At this point, press and hold the Right Control Switch
again to go back to the previous speed mode.
Twist the throttle to speed up.
Press button to light up left/right signal, then the signal flashes, and press the
button again to turn it off.
Double press the left or right turn signal button to use emergency flashers.
Press and hold the horn button, and the horn will blare out constantly.
Press the button to use bell.
Throttle
Power Button
Right Control Switch
Horn Button
Left Control Switch
Direction Indicator Button
Bell