Assembly
5
Securing the propane tank
□ Once the propane tank is sitting completely on the metal
stand, secure it by turning the preassembled wing screw
on the metal stand clockwise.
6
Connecting the regulator
□ Turn the cylinder valve on the propane tank clockwise to
close the propane tank.
□ Attach the preassembled regulator from the fire table (B)
to the cylinder valve by turning the regulator coupling nut
clockwise. Make sure it is fastened securely and tighten
connections by hand only.
WARNING: Please inspect the rubber o-ring in the
propane tank valve to ensure it is not worn before attaching
the regulator. A worn rubber o-ring can cause leaks,
explosions and serious injury by propane tank.
CYLINDER VALVE
BLACK COUPLING NUT
turn clockwise to connect
REGULATOR
RUBBER O-RING
9
PRESSURE
RELIEF VALVE
BLEED-OFF
VALVE
turn clockwise
to reseal