Terence TS-01 Manual Del Usuario página 22

Maintenance
The good maintenance of the electronic piano is very important to its
service life as well as to reduce failures.
1. Don't open the instrument or attempt to disassemble its parts or modify the internal components in any
way. If it should appear to be malfunctioning, discontinue useimmediately and have it inspected by qualified
service personnel.
2.Only use the specified voltage and adapter. Wrong voltage and adapter will damage the instrument.
3. Do not place the power adapter near heat sources (such as a heater or radiator).Also do not bend the adapter
cable excessively, place heavy objects on it, or otherwise wrap it to avoid damaging.
4. Do not connect the instrument to an electrical outlet using a multiple-connector. Doing so can possibly cause
overheating in the outlet. Remove the electric plug from the outletwhen the instrument is not to be used for
extended periods of time, or during electrical storms. When removing the electric plug from the instrument or
an outlet, always hold the plug itself and not the cord. Pulling by the cord can damage it.
5. Do not expose the electronic piano to excessive dust, vibrations, or extreme cold or heat (such as in direct
sunlight, near a heater, or in a car during the day) to the possibility of panel disfiguration or damage to the
internal components.
6. Do not place the instrument in an unstable position where it might accidentally fall over. Do not rest your
weight on, or place heavy objects on the instrument.
7. Do not expose the instrument to rain, use it near water or in damp or wet conditions, or place any
containers (such as vases, bottles or glasses) containing liquids on it. which might spill into any openings.
8. When cleaning the instrument, unplug the adapter first and use a dry and soft cloth. Do not use paint
thinners, organic solvents, or chemical-impregnated wiping cloths. Do not place vinyl or plastic objects on
the instrument, since this might discolor the panel or keyboard.
9.The instrument needs moisture-proof maintenance during the wet weather. Excessive moisture will result
in bad internal circuit. In wet weather, connect the instrument to power frequently to get rid of the moisture
through the heat generated during operation. When it is too wet, the instrument can be covered with dust
and moisture-proof cloth.
10. The package needs to be unwrapped by an adult for use. Please keep or discard the plastic bag after
unpacking.
The technical specifications of this product are subject to
change without prior notice.
The patterns in this manual and on the packaging are for reference
only. Please refer to the actual product.
20