Bluetooth Connection - Ekoi Bone Manual Del Usuario

BLUETOOTH CONNECTION

Control Button What to do
MFB Power on one or two
BONE temples.
Bluetooth on Activate the Bluetooth.
mobile device After the first Bluetooth
pairing the BONE temples
will connect automatically.

If both BONE temples are powered on, after being paired only the LED
indicator of the primary temple will be solid red, the other LED indicator will
be turned off

If the BONE temples are not connected within 1 minute, the BONE temples will
enter pairing mode again.
MEDIA PLAY/PAUSE
Control What to do
Button
MFB Play: 1 short press
MFB Pause: 1 short press

The MFB button on either side (left or right arm) can be used for this control.
VOLUME – Right BONE temple only
Control What to do
Button
MFB 1 long press

Control only possible if the right BONE temple is powered on. If you are only
using the left BONE temple, this control cannot be made.

8 Sound levels: from level 1 to level 8 and then back to level 1. A prompt tone
announces volume level 8.

The sounds can also be adjusted through your mobile device.
LED Indicator
Status
Blinking quickly
Solid red
LED Indicator
Status
No LED indicator
No LED indicator
LED Indicator Status
No LED indicator
Prompt Tone
No prompt tone
4-tone acute
prompt
Prompt Tone
No prompt tone
No prompt tone
Prompt Tone
1-tone prompt + 1-tone
prompt for level 8
18