POWER ON
Control
What to do
Button
MFB
Press and hold for 3 seconds
MFB
Press and hold for 3 seconds
the MFB button of the other
BONE temple
No control
The BONE temples will pair
themselves automatically
Do NOT power on both MFB buttons at the same time. The BONE temples may
be unable to connect to your mobile device and could need to be powered on
and paired again. You must wait for the LED indicator of the first BONE temple
to blink quickly before powering on the second BONE temple.
POWER OFF
Control
What to do
Button
MFB
Press and hold for 3 seconds
The EKOÏ PREMIUM AUDIO MUSIC Bluetooth will automatically turn off if it is
disconnected for more than 10 minutes.
If either of the BONE temple is powered off, both temples are powered off.
The EKOÏ PREMIUM AUDIO MUSIC Bluetooth will automatically turn off if it is
not paired within 3 minutes.
LED Indicator Status
Blinking slowly then
blinking quickly
To use both BONE temples:
Blinking slowly then
blinking quickly
First BONE temple:
Solid red
Second BONE temple:
No LED Indicator
LED Indicator
Status
Turning off
Prompt Tone
4 consecutive
tone-up prompts
4 consecutive
tone-up prompts
1-tone prompt
Prompt Tone
4 consecutive tone-
down prompts
17