Safety And Information Signs; Hazards And Safety Provisions During Transport - Angelo Po 0S0Vtr Manual De Uso

ENGLISH
The position of the signs provided is shown in
the picture.
Manufacturer and appliance nameplate.
A)
WARNING: read the manual carefully
B)
before carrying out any procedure.
WARNING: when washing the appli-
C)
ance, do not point pressurised water jets at
internal parts.
WARNING: draws attention on com-
D)
pliance with the rules. "Install in compliance
with the applicable regulations and use in well
ventilated premises only".
WARNING: draws the attention on
E)
compliance with the rules. "The Manufacturer
declines all liability in case of failure to com-
ply with the installation and commissioning
instructions".
WARNING: watch out for hot surfaces.
F)

HAZARDS AND SAFETY PROVISIONS DURING TRANSPORT

During transport of the appliance, watch out for the following hazards and provide for the counter-
measures indicated below:
► Source of hazard: Handling of heavy loads
Hazard
Risk of injury due to
body overload
4

SAFETY AND INFORMATION SIGNS

Where or in which situations
does the hazard occur?
• When the appliance
moves
E
D
F
37M3202
C B
CE Marking: indicates that the equipment is
G)
compliant with all relevant laws applicable to
the product.
WEEE symbol: indicates that the appliance is
H)
subject to specifi c waste disposal regulations.
Countermeasures
• Use a suitable lifting
device
• Observe the
values for lifting and
transport
• Wear personal protec-
tive equipment
SAFETY
A
H
Safety device
• Protective gloves
• Protective shoes
limit
• Safety helmet
(e.g. for
pended loads,
overhead opera-
tions...)
3395250_ut_GB
G
sus-