Uline H-8867C Instrucciones De Montaje

H-8867C, H-8868C, H-8869C
H-8871C, H-8872C, H-8873C
CLAMP-ON PRIVACY
PANEL
TOOLS INCLUDED
Allen Wrench 3 mm
Allen Wrench 5 mm
A
Mounting Bracket x 2
NOTE: Remove protective film from acrylic
panels before assembling.
1. Separate mounting bracket (A). Firmly press one
plastic mat (B) into each side of mounting bracket.
Repeat for remaining brackets. (See Figure 1)
Figure 1
PAGE 1 OF 6
B
Plastic Mat x 4
F
Long Set Screw M6 x 15 mm
x 4
A
B
1-800-295-5510
uline.com
PARTS
C
Screw M6 x 35 mm
x 2
G
Short Set Screw M6 x 8 mm
x 4
ASSEMBLY
2. Place privacy panel against plastic mat (B) in back
half of mounting bracket (A), slide front of mounting
bracket (A) in place and use 5 mm Allen wrench
to secure one M6 x 12 mm screw (E). Repeat for
remaining brackets. (See Figure 2)
Figure 2
Para Español, vea páginas 3-4.
Pour le français, consulter les pages 5-6.
D E
Screw M6 x 20 mm Allen Screw M6 x 12 mm
x 2 x 2
E
0224 IH-8867C