Uline H-8220 Instrucciones De Montaje

H-8220, H-8221
DOWNTOWN
PRIVACY PANELS
TOOL NEEDED
Phillips
Screwdriver
A
Bracket x 2
NOTE: If privacy panel was included as part of
a workstation, disregard these instructions
and follow H-7741 that is packaged with
desk frame.
NOTE: If adding the privacy panel to an
assembled desk or table, the top(s) will need to
be removed to attach the brackets.
NOTE: Use Phillips screwdriver to tighten screws.
IMPORTANT! Check that all parts are included.
1. Align bracket (A) with holes in desk frame. Use
two M6 x 15 mm screws (B) to secure. Repeat for
remaining bracket. (See Figure 1)
Figure 1
PAGE 1 OF 6
1-800-295-5510
uline.com
Two Person Assembly
Recommended
PARTS
B
Screw x 4
M6 x 15 mm
ASSEMBLY
B
A
Pour le français, consulter les pages 5-6.
C
Privacy Panel x 1
2. Insert privacy panel (C) into brackets (A). (See Figure 2)
Figure 2
C
Para Español, vea páginas 3-4.
A
0721 IH-8220