Removing The Cheek Pads; Installing The Cheek Pads - Sena Outrush R Manual Del Usuario

1.4.8

Removing the Cheek Pads

1. Unsnap the three fasteners of the cheek pad from the
helmet.
2. Repeat the process on the opposite side.
1.4.9

Installing the Cheek Pads

1. Pass the chinstrap through the hole of the cheek pad
and snap the three fasteners of the cheek pad into
place.
2. Repeat the process on the opposite side.
ABOUT THE OUTRUSH R BLUETOOTH HELMET
17