Preparing The Camera; Opening And Closing The Camera; Inserting The Batteries - Zeiss Secacam 7 Instrucciones De Uso

Ocultar thumbs Ver también para Secacam 7:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

3. Preparing the camera

CAUTION!
Pull the contact breaker out of the battery compartment. This might need a little force. Only 
then will the camera's power supply activate so that the camera can be used.

3.1 Opening and closing the camera

Open: Loosen the locking clip on the right side of the camera. Grasp the back of the lock with two fingers 
and pull it away from the camera until the lock pops open.
Close: Close the camera and place the locking clip on the two hooks on the side. Then press the locking clip
backwards.

3.2 Inserting the batteries

CAUTION!
The camera must be turned off before inserting new batteries! Please use either disposable or 
rechargeable batteries, do not mix different types of batteries. For black night photography, 
please replace all batteries with fully charged batteries.
Battery compartment: Open the camera. Press the EJECT button at the bottom right. The battery 
compartment now extends about 2 cm out of the bottom of the camera. A mechanism prevents it from
falling out. To remove the compartment completely, pull it straight down with some force.
28
Tabla de contenido
loading

Este manual también es adecuado para:

Secacam 5

Tabla de contenido