Operating Instructions - Allen + Roth 8000753/23Mmp723-Po117 Instrucciones De Montaje

OPERATING INSTRUCTIONS

FUNCTION
POWER
FLAME
HEATER
23MMP723REV1.0
ICON
The POWER button supplies power to all the
functions of the heater. Pressing the POWER button
again will put the heater in standby mode.
Holding the Power button on the control panel for 10
seconds will disable the heater function.
There are 5 brightness levels that can be selected
and OFF (00) setting. Settings F5 - F1 decrease in
brightness.
Press the heater button on the control panel to turn
on/off (00) and adjust the heater setting.
To change between °F and °C, press and hold the
HEATER button on the control panel for 3 seconds.
The thermostat setting range is 62°F - 82°F
( 17°C - 28°C) or continuously ON.
22
DESCRIPTION
CONTROL
PANEL
LOCATION