Connect The Adapter - Cisco Systems Linksys WUSB54G Guía De Instalación Rápida

2

Connect the Adapter

A
Connect one end of the included
USB cable to the Adapter's USB
port.
B
Connect the other end of the
cable to one of the USB ports on
your computer.
C
The Power LED should light up
when the Adapter is plugged in.
D
Raise the antenna. Make sure the
antenna points straight up into the
air, at a 90º angle from the
Adapter. This will ensure optimum
wireless operating range and per-
formance.
Proceed to Step 3.
Connecting
the Adapter
The Adapter's
USB Port
3