Parts Identification - Sony Zrd-Vp15Eb Manual De Instrucciones

Parts Identification

Left/Right
 Cabinet joints
Connect to other Display Cabinets.
There are two cabinet joints on the right side,
left side, top and bottom.
 PWR OUT (AC power output) connector
Use a power cord for connecting between the
1
cabinets* (not supplied) to connect this
connector to the PWR IN (AC power input)
connector on the succeeding Display Cabinet in
the daisy-chain connection.
This connector is not used for the last Display
Cabinet in the daisy-chain connection.
 PWR IN (AC power input) connector
Use a power cord for connecting between the
1
cabinets* (not supplied) to connect this
connector to the PWR OUT (AC power output)
connector on the preceding Display Cabinet in
the daisy-chain connection.
For the first Display Cabinet in the daisy-chain
connection, use a power cord for connecting
between the power and the cabinet*
supplied) to connect this connector to the
circuit breaker.
22
EN
Parts Identification
 TEST switch
By using the switch, the test pattern can be
displayed without connecting the controller.
Operation
Press and hold
Press
 STATUS indicator
Indicates the system status of the Display
Cabinet.
Status
The Display
Cabinet is turned
off
The system is in the
startup state
2
(not
Error status
Description
Normal mode: Goes into test
pattern mode.
Test pattern mode: Goes into
normal mode.
Normal mode: No changes
Test pattern mode: Changes the
test pattern.
ZRD-VP15EB ZRD-VP15EM
ZRD-VP23EB ZRD-VP23EM
Off Off
Lit white 
Lit red
Lit magenta 
Lit yellow 
Returns to lit
white
Blinking red Blinking red