Connection Diagrams; Install The Hardware; Connect The Cables - Axis Communications Q1604 Guia De Instalacion

AXIS Q1604 Network Camera
1 Tip
Audio Input
Microphone/Line in
Audio Output
Line out (mono)

Connection Diagrams

I/O Connector
1
0 V DC (-)
2
DC output 3.3 V, max 50 mA
3
Digital input 0 to max 40 V DC
4
Digital output 0 to max 40 V DC, open drain, 100 mA

Install the Hardware

Connect the Cables

1. Connect external input/output devices if required, such as alarm devices. For information
about the terminal connector pins, see page 15 .
2. Connect an active speaker and/or external microphone if required.
2 Ring
1
2
3
4
16
3 Sleeve
Ground
Ground