ResMed Air10 Manual De Instrucciones

ResMed Confidential Proprietary Information, not to be reproduced or made available to third parties
without prior consent from ResMed and not to be used in any unauthorised way.
 2023 ResMed.
SPECIFICATION
– PRINTED MATERIALS
Rev Change Date document
Note
1 K014281-00
Air10 DC/DC Converter 90W User Guide GLO Multi
1. TRANSLATION DESCRIPTION
Rev English source
1 English within this document
2. PRINT DETAILS
Dimensions:
Binding:
Art Work:
Manufacturer:
3. RESMED QC INSPECTION
For general sampling and inspection requirements, refer to AWI203-002 Appendix A, Printed or Unprinted
Materials and Labels, Criteria 1, 2, 3, 4, 5, 6, 8 and 9
Additional requirement
a) None
4. FOR ALL OTHER REQUIREMENTS, REFER TO RESMED SUPPLIER MANUAL AQP119.
5. CHANGE HISTORY
This only applies when this document is revised without a change to the related English Reference. Changes
must be limited to formatting errors or errors not flowing from the English Reference.
REVISION 1
Section Heading
N/A
Document prepared by
drafted
28 Mar 2023 Cassandra Wilson
A5 portrait (210 H x 148W) ± 2mm finished.
Self-covered, printed double sided
Colour: Black
Stock: 80gsm offset
Additional blank pages may be added to the back of the document if the
current text page count is not a multiple of 4 (a manufacturing requirement).
Saddle stitch for 88pp and under, Burst bind for 89pp and over.
Exceptions can be made for small runs printed via digital processing.
As shown on following pages.
If re-typeset, the same styles and sizes must be maintained.
Where the colours indicated differ between Style (as stated above) and Art
work, then the specifications provided for Style should be followed.
Outside printer.
(Small quantities may be printed inhouse)
Summary of change
Initial release
(Name)
Lisa Oliver (or delegate, refer to change note)
This translation replaces...
3781073
DOC NO 3781086
PAGE 1 of 49
REV 1
Document Checked by
(Name)