Closing Force Adjustment - Cherubini Blue Wave Rx Serie Instrucciones

This system, the only one of its kind, guarantees that cassette-awnings remain perfectly
closed, without any danger of the canvas suffering excessive traction.
The system works in all kinds of applications, thanks to the possibility of manually
adjusting the closing force.
The Blue Wave RX is factory set to a closing force of 40 % of the nominal torque (e.g.:
40 % of 50 Nm = 20 Nm). This force can be changed very easily by the remote control.
It can be reduced by 20 % or increased up to 70 %, depending on the desired result.
From the CLOSING position
UP
From the OPENING position
DOWN

CLOSING FORCE ADJUSTMENT

UP DOWN DOWN
20 %
DOWN
40 %
DOWN
70 %
DOWN UP
20 %
40 %
70 %
UP UP
DOWN UP
DOWN DOWN
UP DOWN DOWN
UP UP DOWN
UP UP UP
31
confirm
confirm