Setting/Deleting A Middle Position - Cherubini Blue Wave Rx Serie Instrucciones

SETTING/DELETING A MIDDLE POSITION

SETTING THE MIDDLE POSITION
From the CLOSING position
From the OPENING position
After the sequence the motor will go into "Dead Man" mode so as to enable the exact
adjustment of the middle position desired. To memorise the position chosen, confirm
with this sequence:
MOVEMENT TO MIDDLE POSITION
To bring the awning to the middle
position do the following:
DELETING THE MIDDLE POSITION
Use one of the sequences shown here. The motor will confirm with 3 final movements that
the middle position has been cancelled.
From the CLOSING position
From the OPENING position
or
30