Dismantling; Removing The Keramott; Removing The Insert - Austroflamm Backfach Instalación

12 | Dismantling

12 Dismantling
For correct uninstallation and dismantling of the baking compartment, contact your Austroflamm spe-
cialist dealer.

12.1 Removing the Keramott

Fig. 22: Removing the Keramott

12.2 Removing the insert

Fig. 23: Taking out the insert
46
EN
1) Keramott blocks simply need to be removed from the
baking compartment.
 To do so, first start with the side blocks, then the
rear block and finally the block on the floor of the
baking compartment.
1) Remove all screws and take out the insert.
Backfach