Execution; Fitting The Baking Compartment - Austroflamm Backfach Instalación

6 | Installation
6.2

Execution

6.2.1

Fitting the baking compartment

Fig. 4: Removing the smoke collector
Fig. 5: Taking out the Keramott
Fig. 6: Taking out the insert
36
EN
Should the smoke collector be mounted on the fireplace in-
sert, it must first be removed. To do so, please proceed as
follows:
1) Undo hexagon nuts, washers and clamping shoe, and
remove smoke collector.
1) Take Keramott out of the baking compartment.
1) Undo all screws from the insert and take insert out of
the baking compartment.
Backfach