Cleaning Instructions; Maintenance; Factory Service - Aircast Venaflow Elite 30BI-S Manual Del Operador

Maintenance

Cleaning Instructions

The tube assembly is reusable . Both the pump case and the tube assembly can
be cleaned with mild soap solution, antiseptic or disinfectant wipes . Apply using a
dampened cloth or wipes . Do not submerge the device in any liquid .
No adverse effects were found using isopropyl alcohol and hydrogen peroxide (Oxivir
Tb) . It is advised to avoid using Dimethyl benzyl ammonium chloride or Dimethyl
ethylbenzyl ammonium cloride (Tec-Surf II), or solutions containing chlorine .
Maintenance
Prior to each use, inspect the device, power cord, cuff and tubing for damage .
If damage is detected, contact Customer Service . See Customer Care Contact
Information section .
NOTE: The unit was tested during the manufacturing process and is ready to be
placed into service upon delivery .

Factory Service

When the VenaFlow Elite System requires factory service, contact Customer Service .
See Customer Care Contact Information section .
18
ENGLISH