Inside The Motion Detector; Infrared Sensors; Anti Sabotage Button - Eminent Em8610 R0 Manual Del Usuario

39 |
MULTILINGUAL
Flashes 2x : Self-test completed. Motion detector is active
Flashes once per 3 seconds : Battery power low, exchange battery*
* You will receive a text message if battery level is low. The message contains the
following information (up to sensor 9) Sensor name with additionally the text 'battery
almost empty'. From sensor 10 the name will be replaced by a zone nr. with
additionally the text 'battery almost empty'.

8.2 Inside the motion detector

Remove the screw on top of the motion detector and gently remove the front and
back.
Infrared sensor
LED On/Off
Anti sabotage
button
Group setting (jumpers)

8.2.1 Infrared sensors

The infrared sensors detect the motion. These sensors need to be clean at all time.
Do no touch the sensors !

8.2.2 Anti sabotage button

If the motion detector is opened this switch will detect it and trigger the alarm.