Operating The Alarm System; Arm The System (All Sensors); Partially Arm The System (In-Home Security); Disarm The System Using The Control Panel - Eminent Em8610 R0 Manual Del Usuario

11 |
MULTILINGUAL

4.0 Operating the Alarm System

4.1 Arm the system (all sensors)

Press .

4.2 Partially arm the system (In-home security)

. All sensors in the "Normal-group" are enabled, sensors in the "Home-
Press
group" are disabled.

4.3 Disarm the system using the control panel

Enter your 4 digit password (default: 1234) and press . You will hear a beep to
notify you the system is disarmed. When you hear 3 beeps the password is not
correctly entered.

4.4 Disarm using RFID-tag

Hold the RFID-tag close to the RFID-reader (circle left of the number pad). You will
hear a beep to notify you the system is disarmed. Notice: This feature will only
work when the device is powered by the power adapter and is disabled when
working on backup batteries.
Remark : RFID-tags can only be used to disarm the system not to arm the system.
Remark : When the device is not powered by the power supply you cannot disarm the
system using the RFID-tag.

4.5 Record and playback a personal message

Press to start recording a personal message of max. 10 seconds. When you are
ready press to stop recording. You can playback the message by pressing the
circle.