Maytag W11556494C Manual De Instrucciones

MAYTAG MAYTAG
Appearance may vary depending on model.
1 POWER
Touch to turn on/off or to stop/cancel a cycle.
2 CYCLE KNOB
Turn knob to select desired cycle.
EXTRA POWER
Press to boost stain fighting on selected cycle.
3
DISPLAY LCD
The display shows the time required for the cycle to complete.
Factors such as load size and water pressure may affect the
time shown in the display. Tightly packed loads, unbalanced
loads, or excessive suds may cause the washer to adjust cycle
time as well.
ADD GARMENT
When Add Garment is lit, you may open the lid, which automatically
pauses the cycle, and add items. To resume, close the lid and hold
the START/PAUSE button to start the washer again.
4 START/PAUSE
Touch and hold the START/PAUSE button to start cycle. Touch
during a cycle to pause cycle and unlock lid.
NOTE: If machine is spinning it may take longer to unlock lid.
CYCLE MODIFIERS (Not all modifiers are available on all cycles)
5
SPIN
Touch to modify the cycle's available spin speeds (Off, Medium,
Fast).
TEMP
Touch to modify the cycle's available temperatures (Tap Cold,
Cold, Cool, Warm, Hot).
SOIL
Touch to modify the cycle's available soil levels. Increase soil
level for heavily soiled items and decrease soil level for lightly
soiled items (Extra Light, Light, Normal, Heavy, Extra Heavy).
W11556494C
QUICK REFERENCE GUIDE QUICK REFERENCE GUIDE
TOP LOADING WASHING MACHINE TOP LOADING WASHING MACHINE
®
CONTROL PANEL AND FEATURES
2
6
CYCLE OPTIONS (Not all options are available on all cycles).
DEEP FILL
Touch to add more water to the washer from the cycle's auto
sensed level (Auto, Medium, High, Max Fill).
REMOTE ENABLE
Touch each time you want to remotely control via the Maytag™
app. Follow the instructions in the "GET THE MAYTAG™ APP
AND GET CONNECTED" section below for more details.
Opening the lid cancels "Remote Enable".
FABRIC SOFTENER
Touch to let the machine know when you have added fabric
softener to the dispenser drawer.
DELAY START
Touch to delay the start of the wash cycle for up to 12 hours.
EXTRA RINSE
Touch to automatically add a second rinse available on most
cycles.
CYCLE SIGNAL
Touch to turn the end of cycle signal on/off and adjust the tone
volume when a button is touched.
NOTE: If the washer detects an out-of-balance condition it
may pause and attempt to correct the situation. During this time
"OOB" will briefly be displayed.
6
3 1
5 4