Attaching The Rsm To The Radio - Motorola Solutions Impres Rm730 Guia Del Usuario

MN007524A01-AB
Chapter 1 : About PMMN4131 RM730 IMPRES Windporting RSM, Small (IP68)
Figure 3: Receiving
Recommended Wearing Position
Figure 4: RM730 Wearing Position
1.3

Attaching the RSM to the Radio

Procedure:
1 Attach the RSM connector to the side connector of the radio.
2 Secure the connection screw in a clockwise direction until tightened.
NOTE: To ensure proper operation, turn off the radio before connecting the RSM to the
radio. Connecting the RSM to the radio disables the speaker of the radio, but does not
disable the microphone and PTT of the radio.
10