Preparation For Operation; Device Placement; Device Assembly - Fromm & Starck STAR ATFE 09 Manual De Instrucciones

Accessories list
No Image
A
B
C
D
E
F

3.2. Preparation for operation

DEVICE PLACEMENT

The ambient temperature must not exceed 40°C and the relative humidity must not
exceed 85%. The device should be positioned in a way that ensures good air
circulation. Keep the device away from any hot surfaces. Always use the device on
an even, stable, clean, fireproof and dry surface.
The device should be positioned in such a way that the mains plug can be reached
at any time. Make sure that the power supply to the device corresponds to the data
given on the rating plate!

DEVICE ASSEMBLY

Before proceeding with the assembly, it is necessary to prepare and secure
a suitable space. It is recommended to use a protective mat or pad to prevent
scratching the product/floor.
Step 1
Type
M6
M6
M6
M6
St4.2
4x4mm Allen
wrench
Quantity
6
8
12
16
24
1