Controller-To-Pump Connection - Agilent TwisTorr Medium-TMP Manual De Usuario

Technical Information

Controller-to-Pump Connection

A five-meter long cable is provided to connect the controller to the pump. The
following figures show the pump connector configuration where pins:
B-C-D = 3-phase output to pump motor

E = ground

A-F-G = Reserved for AGILENT use

Figure 40 Pump connector
The pump cable can be extended by means of an optional extension cable
(see Accessories and Spare Parts Table).
160 Agilent TwisTorr Medium-TMP Rack Controller User Manual