SUPAIR ALTIRANDO LITE Manual De Instrucciones página 55

Harness User's manual | ALTIRANDO LITE
CONNECTING THE WING TO THE HARNESS
Connecting the wing to the harness.
Without twisting the risers, connect them to the harness attachment loops using the self-locking carabi-
ners.
Check for the risers to be properly positioned and untwisted. The «A» risers must be located at the front
and facing the flight direction (see diagram).
Enfin, vérifiez que les mousquetons soient correctement fermés.
Installing the accelerator.
« A » risers
Install the accelerator by following the previous instructions.
Connect it to the wing using the split hooks.
Once the accelerator/speedbar is connected adjust its length
according to the wing recommended measurements.
Self-locking
carabiners.
Harness
Flight direction
ALTIRANDO LITE | page 22