Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

I N S T A L L A T I O N
PART #D8089
Large Flat Panel Tilt Mount
The Large Flat Panel Tilt Mount is a quick discon-
nect mounting solution for large flat panel displays.
The mount features adjustability between 0 and 15
degrees of tilt.
Once the tilt brackets are attached to your display,
simply install the mount on a wall, lock the display
in place, and attach your audio/video cables.
BEFORE YOU BEGIN
• Caution: To prevent damage to the mount, which could void factory warranty and affect the attached equipment,
thoroughly study all instructions and illustrations before you begin the installation. Pay particular attention to the
"Important Warnings and Precautions" on Page 3.
• If a defect is discovered after Dell's initial 21-day Customer Satisfaction period, Chief Mfg. will, at its option, repair or replace
the product at no charge provided it is returned during the warranty period. Please note contact information for Chief Mfg.
listed below.
• Did you know that home consumers can purchase professional Plasma TV installation services through Dell? Through our
third-party providers we offer home installation options ranging from simple unboxing and audio/visual component hookup to
a Premier TV Installation with wall mount and professional installation of up to 5 home theater or surround-sound speakers. If
you have purchased a Plasma TV Installation offer through Dell, a third-party installation provider should contact you to
schedule your installation. If you need to schedule this service, please call 1-800-897-1582. If you would like to purchase
installation services for your new Dell Plasma TV and have not already done so, please contact Dell sales at 1-800-915-3355.
If you have purchased an installation package, but would like to upgrade your installation service, please call Dell Consumer
Customer Care at 1-800-624-9897.
CHIEF MANUFACTURING INC.
1-800-582-6480 952-894-6280 FAX 952-894-6918
8401 EAGLE CREEK PARKWAY
SAVAGE, MINNESOTA 55378 USA
I N S T R U C T I O N S
EUROPE
chiefeurope@chiefmfg.com
8805-000086 (Rev. D)
2004 Chief Manufacturing
www.chiefmfg.com
02/05
Tabla de contenido
loading

Resumen de contenidos para CHIEF D8089

  • Página 11: Soporte Inclinable Para Pantallas Planas Grandes

    “Advertencias y Precauciones Importantes” en la página 3. • Si se descubre un defecto después del período inicial de 30 días de Satisfacción al Cliente de Dell, Chief Mfg. reparará o reemplazará, a opción suya, el producto sin cargo siempre que se devuelva durante el período de garantía. Observe la información de contacto para Chief Mfg.
  • Página 12: Esta Página De Dejó En Blancoa Propósito

    Instrucciones de instalación MSP-DCCPDPT ESTA PÁGINA DE DEJÓ EN BLANCO A PROPÓSITO...
  • Página 13: Herramientas Necesarias Para La Instalación

    Instrucciones de instalación MSP-DCCPDPT ¡ADVERTENCIAS Y PRECAUCIONES IMPORTANTES! ADVERTENCIA: Una ADVERTENCIA le avisa la posibilidad de una lesión grave o la muerte si no sigue las instrucciones. PRECAUCIÓN: Una PRECAUCIÓN le avisa la posibilidad de que haya daños o destrucción del equipo si no sigue las instrucciones correspondientes.
  • Página 14: Lista De Piezas

    Instrucciones de instalación MSP-DCCPDPT LISTA DE PIEZAS ARTÍ- CANTI- ARTÍ- CANTI- DESCRIPCIÓN DESCRIPCIÓN CULO CULO PLACA, pared TORNILLO, autorroscante PUNTAL, interfaz (derecho) TORNILLO, de rosca, 5/16” PUNTAL, interfaz (izquierdo) ARANDELA, 5/16” TORNILLO, Phillips, M8 x 12 ANCLA, fiador oscilante a presión ARANDELA, plana, 1/4”...
  • Página 15: Inspeccione La Unidad Antes De La Instalación

    Instrucciones de instalación MSP-DCCPDPT INSPECCIONE LA UNIDAD ANTES DE LA INSTALACIÓN Inspeccione cuidadosamente el soporte para detectar daños en el embarque (vea la Figura 1). Si existe algún daño, llame al agente de reclamaciones del transportista y no siga con la instalación hasta que el transportista haya revisado el daño.
  • Página 16: Instalación De La Placa De Pared

    Instrucciones de instalación MSP-DCCPDPT INSTALACIÓN DE LA PLACA DE PARED Seleccione una de las siguientes opciones para instalar la placa de pared: • Instrucciones de instalación del tornillo de rosca (Opción A) • Instrucciones de instalación en columna de acero/ pared de yeso (Opción B) Instrucciones de instalación del tornillo de rosca (Opción A)
  • Página 17 Instrucciones de instalación MSP-DCCPDPT Instrucciones de instalación en columna de acero/ pared de yeso (Opción B) Instale las placas de pared del modo siguiente: ADVERTENCIA: Es responsabilidad del instalador verificar que la estructura a la cual se sujetará el soporte pueda cargar de manera segura cinco veces el peso combinado de la carga de todos los componentes y el equipo.
  • Página 18: Instalación De La Pantalla

    Instrucciones de instalación MSP-DCCPDPT INSTALACIÓN DE LA PANTALLA Instale la pantalla del modo siguiente: Coloque la pantalla en la placa de pared (10) enganchando los ganchos de los puntales (20 y 30) en la parte superior de la placa de pared (vea la Figura 10).
  • Página 19: Instrucciones Para La Remoción De La Pantalla

    Instrucciones de instalación MSP-DCCPDPT INSTRUCCIONES PARA LA REMOCIÓN DE LA PANTALLA Para darle servicio a la pantalla, quítela de la placa de pared del modo siguiente: ADVERTENCIA: Desconecte la energía y los cables de audio y vídeo antes de quitar la pantalla del soporte de pared.

Tabla de contenido