Uline H-5493 Instalación

H-5493, H-5494, H-5495
H-5496, H-5497
ROLL-UP TRAFFIC
SIGN STAND
1. Push in kick pins and release each of the four legs.
(See Figure 1)
2. To adjust the length of the legs, pull on the black
foot of the leg until the locking pin clicks into place.
(See Figure 2)
PAGE 1 OF 6
1-800-295-5510
uline.com
SET-UP
Figure 1
Figure 2
3. If desired, adjust the height of the legs by pulling
up on the stand until the locking pins slide into their
second position. (See Figure 3)
4. Unroll sign and insert cross brace into the plastic
pockets. (See Figure 4)
Para Español, vea páginas 3-4.
Pour le français, consulter les pages 5-6.
Figure 3
Figure 4
0521 IH-5493