Steelcase criterion plus Manual De Instrucciones

criterion
Back tension
Turn knob toward the
left side of chair to
increase tension.
Height- width-
adjustable arms*
Press button
under arm caps
to raise or
lower armrest.
Grasp arm
caps and slide
in or out to
change width.
Seat Angle
Lift paddle and shift
your weight to tilt seat
forward or back.
*
Optional features (may not be included on your chair).
For Français and Español versions visit www.steelcase.com
plus
®
adjusts to fit you
Upright back lock
To lock, lean forward,
then flip switch
forward. To release,
lean forward, then flip
switch back.
Seat height
To raise chair, lift body
weight up and pull
lever up. To lower
chair, remain seated
and pull lever up.
Back height
While seated, pull
handle toward you
and raise or lower.
(You may need to help
move the backrest with
your other hand).
Seat depth
This feature can be
adjusted manually
by moving the seat
to either the middle
or rearmost position.
Important: Make sure
the screws are
tightened to
45-90 in. lbs.
torque.