Sempre 92596 Manual Del Usuario página 23

press and hold the CH button
search. However, this can only be carried out after
the search for time signals has been completed.
3. Around 3 minutes after the base unit has been
powered, it will search for time signals emitted
through the signal transmitter in your country.
During this time, the time signal icon ( )
chapter "Time functions") blinks in the clock and
alarm display area
searching for the time signals.
− When the time signals have been successfully
received, the time signal icon ( ) will remain visible
and the current date and a coordinated universal
time will show in the clock and alarm display area.
The base unit will continue to receive time signals
every night (up to 3 times) and synchronize with the
displayed time.
− During the search for time signals, all other setting
functions (e.g. manual and alarm settings) will be
disabled.
− When no time signals have been received after
about 7 minutes, the time signal icon will turn off.
− In case of an unsuccessful search for the time signals,
press and hold the RCC button
search. In order to ensure the best possible signal
receptions, avoid placing the base unit in buildings
with lots of concrete and metal structures, or near
electronic equipment such as TVs, computers, power
lines, radio transmitters, etc. If necessary, relocate
the base unit.
AFTER SALES SUPPORT
Preparing the base unit for use
, indicating the base unit is
33
1 855 754 8297
USA
to initiate a new
7
36
to initiate a new
16
USA
(see
23