Inserting Or Replacing Batteries - Sempre 92596 Manual Del Usuario

Inserting or replacing batteries

1. Open the battery compartment
the base unit
2. For battery replacement, remove the old batteries
first. Insert 2 batteries
the battery compartment.
Pay attention to the correct battery polarity (+ or -).
3. Close the battery compartment.
The display
sound once the batteries have been inserted. Wait
for about 30 minutes. During this time the base unit
gathers the weather data and receives the time sig-
nals (see chapter "Searching for signals").
AC power supply operation
CAUTION!
Risk of damage!
If the weather station is connected to a
power socket, it operates from the AC
power supply even if batteries are inserted.
Remove any batteries from the base unit as
they may leak and damage the unit.
1. Connect the output plug
to the DC input jack
24
2. Connect the power adaptor to a socket. Only connect
the power adaptor to an AC power supply
(100 -240 V AC, 50/60 Hz).
AFTER SALES SUPPORT
Preparing the base unit for use
.
1
25
will turn on and an alarm tone will
2
23
10
1 855 754 8297
USA
on the back of
11
(size: AA, provided) into
of the power adaptor
of the base unit
USA
.
1
21