Descargar Imprimir esta página
MSA 47K Serie Guia De Inicio Rapido
Ocultar thumbs Ver también para 47K Serie:
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 7

Enlaces rápidos

Quick Start Guide
Series 47K
Gas Detector
CAUTION
This guide is not a substitute for the User and
Maintenance manual contained in the product literature
CD.
The Series 47K gas detectors User and Maintenance
manual must be carefully read by all individuals who
have or will have the responsibility for using or
servicing the product.
1. The MSA Series 47K catalytic sensor is suitable for the
detection of gases and vapours in air with a concentration
below the Lower Explosive Limit (LEL).
2. MSA gas sensors/detectors Series 47K can be operated in
conjunction with the following MSA control units:
SUPREMA
9010/9020 LCD
E 292
ED 098 SMD
3. The Series 47K catalytic sensor cannot measure
concentrations of gases and vapours in inert atmospheres
or oxygen deficient atmospheres. The European standard
EN 50073 indicates an oxygen concentration higher than
10 Vol. % is necessary for correct operation of catalytic
sensors.
4. The certification does not permit use of the Series 47K
sensors in oxygen enriched atmospheres.
GB
Order No.: 10045913/02
loading

Resumen de contenidos para MSA 47K Serie

  • Página 7: Detector De Gases

    47K. 1. El sensor catalítico de la serie 47K de MSA es adecuado para la detección de gases y vapores en el aire con concentra- ciones inferiores al Límite Inferior de Explosividad (LEL).
  • Página 8 5. Los sensores catalíticos pueden resultar envenenados por altos niveles o larga exposición a ciertas sustancias presentes en la atmósfera que se controla. Cuando un sensor catalítico se instala en un lugar donde estas sustancias puedan estar presentes, los sensores deben recalibrarse tras la exposición a tales sustancias para garantizar el correcto funcionamiento y la exactitud de medida del sensor.

Este manual también es adecuado para:

S47kS47k-ht-prp