INNO TR112 Instrucciones De Instalación

1 2 3 4
support@innoracks.com
TR112
TR Fit Hooks
No. Parts
1 Base plate
5 6
Nut plate
2
3 Bolt
[M6x18mm]
4 Washer
Allen key
5
6 Instruction manual
9009211TR1121 A
TR112
Manufacturer
LAND ROVER
Nut plate
Notches
Qty
8
8
8
8
1
1
Inside of vehicle
Nut plate
Genuine roof rail
Installation Procedure for the individual Vehicle Model
Vehicle model Vehicle type Model year
LR3 w / Base rail
2005 -2009
●Washers are not required for installation.
Clean the roof rail of the vehicle.
Cross bar
●Be sure to install the carriers so that the cross bars are
positioned vertically against the direction of the vehicle.
●Change the installation positions of the front and rear
carriers in accordance with the attachment used so that
the load does not touch the rear gate and/or the spoiler of
the vehicle.
Insert 4 nut plates into one genuine
roof rail. The nut plate should be
inserted from the outside of the
vehicle, and push down into the notch
side (the inside of the vehicle) as
illustrated.
Genuine roof rail
●Inserting the nut plate while lifting the edge of the genuine
roof rail will ease the procedure.
Notch
2
Loading conditions
Maximum Load Capacity Bike
140 lbs ( 64 kg)
3
( Load + Base rack
+ Attachments )