LUND Interceptor Instrucciones De Instalación

For proper installation and best possible fit, please read all instructions BEFORE you begin.
For technical assistance or to obtain missing parts, please call Customer Relations at 1-800-241-7219.
Important Safety Information
• CAUTION - Before driving, ensure that the hood shield is properly secured to vehicle.
• Do not use automatic "brush-style" car washes.
• Do not use cleaning solvents of any kind.
• Periodically check all components for tightness.
Contents
NOTE: Actual product may vary from illustration.
Hood shield
Tools Required
Car Wash Supplies
Pen Center punch
Preparation Before Painting / Installation
• A trial fit is recommended to ensure proper positioning and fit.
• Check fit of parts before painting as we will not accept the return of modified or painted parts.
• Wash and dry your vehicle to remove any debris and/or dirt from the installation area.
Installation Steps
Clean leading edge of hood thoroughly and
dry with a soft cloth.
1
Installation Instructions
Interceptor
Clean Towel Phillips screwdriver
Hammer
NOTE: Actual application may vary slightly from illustrations.
™
Screw x4 Bump ons
x3
#16
.177"
4.5 mm
Drill and bit, stop collar
Anti corrosion agent
2
Page 1 of 3
I - Sheet Number I-1192 Rev.A
Alcohol
Pad
Safety glasses
Open hood.